• Reduced price
HES16002 Castle Creation Edge ESC 160A HV for helicopters and airplanes rc

Castle Creation Edge 160A HV OPTO ESC regolatore

Our previous price €315.00
€299.00 Save €16.00

Castle Creation Edge 160A HV ESC OPTO, ESC regulator without beak for 3D class 700/800 helicopters soft box version (packed in bag)

There are not enough products in stock

Castle Creation EDGE HV 120 Brushless ESC 120AHES12002, ESC regulator without beak for 3D class 700/800 helicopters and reproductions up to 2 meters, no box (packed in bag without box)

The new Castle Edge ESC provide New Phoenix Controller AUX Line within more options as below:
a. Gain input-
Allow the ESC to utilize an additional receiver channel to adjust the governor gain.
b. RPM out-
Toggles the AUX Line for every electrical commutation. Divide this number by your number of magnetic pole pairs for mechanical RPM.
c. Excessive load detection-
Prevent damage caused by large current spikes typically caused by too much load or possibly a short in the motor wires.
d. Audible Beacon-
The controller will emit an audible locator signal from the motor when the AUX LINE is above 50% signal.
The beacon is only emitted if the motor is not running 
e. Log Data Reset Percentage-
The users may select a percentage of the data buffer which all data is erased upon ESC boot up.
This helps to ensure that the most recent flight is logged. 
●Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start capabilities to protect your gearing (see the screenshot on the right for more details).
●Opto isolated throttle cable helps reduce radio interference.
●Full data logging capabilities. Measure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery out of electric flight.

● Continuous current: 160Amps

● Type of motors supported: from 2 to 10 and more poles in / outrunner brushless

● Maximum supply voltage: 50V (12s Li-Po - 36 cells Nicad / NiMH)

● Size: 111X52X30.6mm

● Weight 224 grams

● Please download the latest version of the castle link software

NOTE: The ESC does not have the BEC included, to power the servos will need to purchase a separate BEC

To download the software for the settings click  QUI


9 other products in the same category: